Ruedas para Crafter I (2006-2017), Sprinter 2006 - actualidad) - 17 pulgadas

Patrón de pernos: 6x130

Tamaño: 17 pulgadas

Filter op: Maat

Veelgestelde vragen — Ruedas para Crafter I (2006-2017), Sprinter 2006 - actualidad) - 17 pulgadas

De vragen die we het vaakst krijgen over deze collectie. Staat jouw vraag er niet bij? Stuur ons een WhatsApp.

What wheel size does my Mercedes Sprinter have?

The Mercedes Sprinter (2006+) has a PCD of 6×130 with a center bore of 84.1 mm and offset values between ET51 and ET60. This applies to both Sprinter II (2006-2018) and Sprinter III (2018-present). Send us your license plate via WhatsApp, and we'll verify the exact specs and which inch sizes are available for your model.

Can I use the same wheels on my VW Crafter I and Mercedes Sprinter?

Yes, the VW Crafter I (2006-2017) and Mercedes Sprinter share the same platform and therefore the same PCD of 6×130. Important: if you have a Crafter II (from 2017 onwards), it has 5×120 and needs different wheels. Check your build year and let us know via WhatsApp.

What sizes are available for my Sprinter?

For your Sprinter, wheels are available in 16, 17, and 18 inch, all with the correct PCD of 6×130. The choice depends on your load requirements and preference; we're happy to help you figure out what's suitable via a quick WhatsApp chat.

Does the VW Crafter I have the same wheel size as the Crafter II?

No, that's an important difference: Crafter I (2006-2017) has 6×130 like the Sprinter, but Crafter II (from 2017 onwards) has 5×120 and won't fit. Make sure to check your build year; if you're unsure, send your license plate via WhatsApp.

What does ET51-ET60 mean and which should I choose?

ET is the offset of your wheel; for your Sprinter or Crafter I, this ranges between ET51 and ET60, depending on your suspension setup and load requirements. We'll check your details and vehicle beforehand to confirm which ET is safe and suitable for you – get in touch with us via WhatsApp.